RFI
[Top] [All Lists]

Re: [RFI] RFI from arcing power pole 1.1 miles away (video capture of th

To: rfi@contesting.com, 'PVRC Submissions' <PVRC@mailman.qth.net>
Subject: Re: [RFI] RFI from arcing power pole 1.1 miles away (video capture of the arc)
From: Pete Smith N4ZR <pete.n4zr@gmail.com>
Date: Mon, 20 Dec 2021 15:18:53 -0500
List-post: <mailto:rfi@contesting.com>
Don's story reminded me - last weekend I, too, had bad arcing, though in my case it was only really bad on 10 and 15 (where I actually have some gain and directivity).  I sent an e-mail to Nick Bland, my BGE RFI guy, and he stopped by this morning (!) to tell me that he had identified a very similar failure to the one Don found, as well as another rotted crossarm nearby.  He expects that BGE will act quickly on the arcing cutout, perhaps in a day or less, since it may eventually fail open, while the crossarm will go on the maintenance schedule.  Anyway, great response time!

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 12/20/2021 2:36 PM, Don Kirk wrote:
Utter disappointment Saturday morning when I was getting ready for the Stew
Perry 160 meter contest when I noticed new RFI on 160 meters as well as 80
meters to my East, and spent the morning tracking it down to a pole 1.1
miles from my QTH. My portable flag with laptop based SDR receiver made it
very easy to home in on the suspect pole using 80 meters, and then used 136
MHz with 4 element Yagi and portable AM radio to isolate the bad pole from
adjacent poles. Also used 438 MHz with 4 element Yagi and my laptop based
SDR to confirm my findings.

I went back last night (Sunday night) after sunset to see if I could see
the pole arcing because I was pretty sure I knew where the problem was
based on some very up close pictures I had obtained earlier in the day
using a 14.1 mega pixel camera with 35X Optical Zoom. I went to the pole
about 2 hours after Sunset and before even exiting the car I could easily
see arcing where I thought it would be.

Today I uploaded a video onto youtube that captures the arcing as well as
some up close pictures that captures the hardware problem on the pole. Here
is a link to that video for those interested.https://youtu.be/-iU1wbb8Na0

It never ends, but at least this case was obvious.

73,
Don (wd8dsb)
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>