Yes sir. You, me, & a small minority have Fluke instruments and/or better,
VNAs, etc. <smile>
Yes sir, I know that resistance is not really the issue. I was just answering
the question only and trying NOT (for a change) to add extra "stuff". <big
smile>
I knew you'd be along soon to provide concise instruction when I saw the
responses. Didn't want to muddy up the water.
Y'all be well!
Clay
KY5G
Get TypeApp for Android
On Jan 16, 2024, 4:59 PM, at 4:59 PM, Jim Brown <jim@audiosystemsgroup.com>
wrote:
>On 1/16/2024 2:36 PM, Clay Autery wrote:
>> IME, range from "not measurable with commonly available
>equipment/technique
>
>My 40 year old Fluke 8060A will get down below 0.1 Ohms.
>
>The issue is not shield resistance, but rather 1) whether it is a
>shield
>or a wire, 2) the quality of the shield, and 3) where it is connected
>on
>both ends.
>
>73, Jim K9YC
>
>_______________________________________________
>RFI mailing list
>RFI@contesting.com
>http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|