> ... bear in mind that a lot of good Q's can
> be had with QRP - 5 watts or less.
During a recent contest under poor conditions, I was using a small amp to
boost the output to about 200 watts. Things were going tolerably well, when
I stopped for a break and switched the amp off. When I returned, I forgot
to switch the amp back on, and resumed easily working S&P with several
fairly weak stations before I realized I was doing it all with less than 20
watts from the transceiver only! Not real QRP, but it reminded me that
less _can_ be OK.
73 to all, especially those of us who can't make Dayton. 8(
See you in the Anatolian test.
Jon K1US
----- Original Message -----
From: "Dave Barr RDS Inc" <k2yg@bellatlantic.net>
To: <RTTY@contesting.com>
Sent: Friday, May 17, 2002 1:03 PM
Subject: Re: [RTTY] rtty power
> I agree that 50 - 100 watts is plenty for most RTTY work, and overkill
> for PSK in many instances, but bear in mind that a lot of good Q's can
> be had with QRP - 5 watts or less. Admittedly a yagi is of help, but
> even with a dipole a great deal can be worked. K2YG has worked 225
> countries using RTTY qrp, and has a lot of fun and 500 plus Qs in a few
> contests. Running over 100 watts is usually helpful only in DX pileups,
> and then knowing where, when and how to call is probably more important.
>
> 73
> Dave, K2YG
>
> Ben Grokett wrote:
> >
> > Bill, most people use between 50 to 100 watts and do just fine on rtty.
Many others will use a moderate level such as in the 300-400 watt level to
overcome losses typical with the mode. A few run the full legal limit
(1500 w) when dx'ing or during contests.
> >
> > Ben, KR6E
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
|