RTTY
[Top] [All Lists]

Re: [RTTY] WF1B And Rig Interface

To: "'RTTY'" <rtty@contesting.com>
Subject: Re: [RTTY] WF1B And Rig Interface
From: "A.J. Cioffi" <registered@hvc.rr.com>
Reply-to: n2ki@amsat.org
Date: Wed, 9 Mar 2005 06:41:12 -0500
List-post: <mailto:rtty@contesting.com>
RTTY (v 5.02) works fine solo if I do not tell it that the radio is
connected.

RTTY & RITTY are fine without a rig attached.

RITTY works fine solo.

Processor is 500 MHz.  This computer used to run this software until I had
to replace the hard drive so I do not believe the processor is an issue.

I am starting to wonder is the computer needs something to allow a DOS
program to recognize the COM ports.  The Windows programs are fine.  Is that
a possibility?  Anyone?

Tony - N2KI
SYSOP - N2KI DX CLUSTER
dxc.n2ki.com:7300
RF Gateway 145.650
Website: www.n2ki.com
DX Spoken Here


> -----Original Message-----
> From: YL2KF [mailto:YL2KF@ARRL.NET]
> Sent: March 09, 2005 01:34
> To: n2ki@ARRL.NET
> Subject: Re: [RTTY] WF1B And Rig Interface
> 
> A. J. Cioffi wrote:
> 
> >Hi Guys,
> >
> >
> >
> 
> Hello  Tony,
> Can be, maybe or so...Tray only rig , withouth modem aka RITTY.  Working
> - yes/no.
> Only WF1B and RITTY , yes/no . Is it RITTY 100% good, tray it in solo,
> maybe corrupted file.
> Maybe sistem get some strange virus ( was for me ). Is it fast processor
> and new CPU? Can
> be to fast and needed MOSLO or BREMZE software to slow down CPU.
> This is just for ideas. Vhat version ?
> As a WF1B user since V2.2 but now shifted to N1MM/MMTTY  due WinXp.
> 
> 73!
> Vilnis / YL2KF
> 
> 
> >
> >
> >Does anyone know why, when initiating the contesting software (WF1B)
> with
> >the rig attached to com 1 or 2, it immediately shuts down the program.
> I
> >have the com ports set up as Com1 is rig control and Com 2 is the PTT
> for
> >running RITTY in combo with WF1B.  I have tried all the setting I could
> >possibly think of in the INI file and still the software shuts down the
> >second it sees the rig (FT1000MP).  This issue seems to be localized to
the
> >WF1B software.  Other software (Log-EQF) can see the radio on COM1
> with no
> >problems.  Any suggestions?  Thanks
> >
> >
> >
> >Tony - N2KI
> >
> >SYSOP - N2KI DX CLUSTER
> >
> >dxc.n2ki.com:7300
> >
> >RF Gateway 145.650
> >
> >Website: www.n2ki.com
> >
> >DX Spoken Here
> >
> >
> >
> >_______________________________________________
> >RTTY mailing list
> >RTTY@contesting.com
> >http://lists.contesting.com/mailman/listinfo/rtty
> >
> >
> >
> >



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>