If anyone needs a copy of the original PC Pakratt II, I have it. 1993
vintage.
Anthony - N2KI
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Joe Subich, W4TV
Sent: Thursday, February 21, 2008 9:38 AM
To: 'Steve and Judy'; rtty@contesting.com
Subject: Re: [RTTY] PK232
Steve,
> I did forget to add that I am also using the Microham MK2R+.
MK2R+ gets its digital mode audio from the ACCC1 jack. Other
than simply feeding the PK232 from the speaker or pin 8 of the
mic jack, the only way to pick up audio is to build an 8-pin
DIN "Y" cable or similar cable adapter to break out the audio
from pins 5 (audio) and 2 (ground).
Be careful connecting parallel loads at pin 5. The output
impedance is relatively high (4.7K). Connecting a low
impedance device in parallel with a high impedance device
can result in unpredictable performance.
73,
... Joe Subich, W4TV
microHAM America
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
support@microham.com
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Steve and Judy
> Sent: Thursday, February 21, 2008 3:24 AM
> To: rtty@contesting.com
> Subject: [RTTY] PK232
>
>
>
> Thanks for all the replies to my Q.
>
> I did forget to add that I am also using the Microham MK2R+.
>
>
> Does anyone know how I can use a PK232 just as a tuning
> indicator when running Win-Test and the MMTTY engine into an
> Icom 756 pro3 .
> Something simple please !
>
> Any help will be much appreciated.
>
> 73 Steve ZC4Li.
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|