I have two IO Gear USB to serial adapters that work great with Logger32, my
FT1KD, N1MM, and EXTFSK.
Windows XP Pro, Vista 32, Vista 64, Windows 7 32 bit and Windows 7 64 bit.
I also have a Prolific USB to serial adapter that sends data but does not
receive.
Supposedly the IO Gear and Prolific adapters are/were made by the same
company.
de Paul, W8AEF
ZF2JI/ZF2TA FO8DX/FO8PLA 8Q7AA XZ0A VU7RG TX5C
--------------------------------------------------
From: "David Levine" <david@levinecentral.com>
Sent: Friday, January 29, 2010 20:53
To: <rtty@contesting.com>
Subject: Re: [RTTY] Windows 7 and USB to Serial adapters
> I'm looking to get a new computer and it might be a laptop which means no
> serial ports and I can't put in a serial card. I have a Kenwood TS-2000 so
> 1
> serial connection is for rig control and I have another serial connection
> which goes to a FSK/CW circuit like the one at
> http://www.aa5au.com/rttyinterface.html and the other end of that cable
> goes
> to the ACC2 port on the back of the TS-2000 for FSK and to the Key port
> for
> sending CW typically via N1MM.
>
> I'd imagine almost any USB cable would support the connection for the rig
> control but would the FTDI chipset support the FSK/CW such as the one
> shown
> at http://www.aa5au.com/rttyinterface.html on a Windows 7 64 bit machine?
> Anyone have specific experience with Windows 7 and a USB connection to
> that
> circuit?
>
> Thanks so much!
> K2DSL - David
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|