I used the standard "Fluttered Signals FIR" profile that comes with MMTTY. It
has a "TAP" of 56 and "FW" of 100, whatever that
means. I use the FIR profile because I prefer using straight vertical and
horizontal bars in the XY tuning as compared to the
ellipses.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: Jeff Blaine AC0C [mailto:keepwalking188@yahoo.com]
Sent: Tuesday, June 01, 2010 4:11 PM
To: Don AA5AU; rtty reflector
Subject: Re: [RTTY] Icom IC-7600 200 Hz Filter on RTTY
Hi Don,
What are the settings used for the BPF in MMTTY for this work?
73/jeff/ac0c
--------------------------------------------------
From: "Don AA5AU" <aa5au@bellsouth.net>
Sent: Tuesday, June 01, 2010 10:56 AM
To: "rtty reflector" <rtty@contesting.com>
Subject: [RTTY] Icom IC-7600 200 Hz Filter on RTTY
> Here are some comparisons between the 250 Hz and 200 Hz filters in the
> IC-7600 while copying E3X last night on 30 meter RTTY.
>
> http://rttycontesting.com/icom_ic7600/e4x.htm
>
> Comments appreciated. I still be starting up a blog soon on my
> adventures with the '7600 - stayed tune!
>
> 73, Don AA5AU
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|