Yes, That's the issue, using the FSK input (RTTY). I use the packet
input for AFSK, so
I don't have to mess with the mike etc.
It's almost as if the tone shifting input is running at high speed,
not 45 baud.
BTW- the objective is to be able to use the filetrs in the MP in the
normal, centered
position, not shifting to the outside of the pass band (like on the
AFSK/ Packet input).
I think this is sofware, and frankly that's where I'm lost.
Thanks for the answer
e-
On 12/13/2010 9:27 PM, Iain MacDonnell - N6ML wrote:
> Hi Ed,
>
> Not sure what you mean by "a siren like tone" .. could it be that the
> tone (pitch) that the MP is using is just higher than you're
> accustomed to?
>
> I'm not sure that you can change that on the MP, although I've never
> used one for RTTY.
>
> 73,
>
> ~Iain / N6ML
>
>
> On Tue, Dec 14, 2010 at 3:03 AM, Edwin Karl<edk0kl@centurytel.net> wrote:
>> Hi folks,
>>
>> I'm a neophyte when it comes to FSK. Been using AFSK for some time and
>> tried to make the switch
>> to FSK, what a problem.
>>
>> Equipment:
>> FT-1000MP MKV, Dell D400 Laptop
>> Rigblaster plus, not for FSK only AFSK, home made interface for FSK, (2
>> transistors feeding PTT,
>> Shift and ground on back of radio).
>> The PTT works fine, the AFSK works fine using Com 1. FSK keys but a
>> siren like tone
>> comes out not at all the "blety-beep" of RTTY. Software MMTTY for AFSK,
>> Also using MMTTY
>> on FSK using parallel port, EXTFSK and DLPORTIO
>>
>> What am I doing wrong? Assuming you can decipher what I'm trying to say ...
>>
>> Thanks
>>
>> ed K0KL
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1170 / Virus Database: 426/3314 - Release Date: 12/13/10
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|