RTTY
[Top] [All Lists]

Re: [RTTY] N1MM LOGTHENPOP made Simpler..

To: "Rick Ellison" <rellison@twcny.rr.com>, <rtty@contesting.com>
Subject: Re: [RTTY] N1MM LOGTHENPOP made Simpler..
From: "Jim W7RY" <w7ry@inbox.com>
Reply-to: Jim W7RY <w7ry@inbox.com>
Date: Tue, 25 Jan 2011 18:35:17 -0800
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
EXCELLENT video.

Thank You!         Thank You!         Thank You!!

73
Jim W7RY



--------------------------------------------------
From: "Rick Ellison" <rellison@twcny.rr.com>
Sent: Tuesday, January 25, 2011 12:31 PM
To: <rtty@contesting.com>
Subject: [RTTY] N1MM LOGTHENPOP made Simpler..

> One of the new changes in the current release has made LOGTHENPOP simpler
> for use in Digital contests.
>
> Previously when Digital call stacking was enabled to place calls into the
> call stack on the bandmap you had to ALT-Click  on a call in the RX window
> (Which still works) but now with the change that was made,  If you single
> click on a call it gets placed in the entry window just like normal. But 
> if
> DCS is enable and you're in run mode you can click on another call that 
> has
> come back to you and it will place that call in the Entry Window and the
> call that was previously in the entry window will move to the call stack.
> This will be repeated for each other call that is clicked on.
>
> The main reason that I use the LOGTHENPOP macro over the LOGTHENGRAB macro
> is if you have configured the F-Key that contains the LOGTHENPOP macro in
> the Main config of the logger under Function Keys that F-Key will become
> part of the ESM sequence. When you finish working a station and if you 
> have
> any calls on the call stack ESM will automatically  highlight the F-Key 
> that
> contains the LOGTHENPOP macro and when you press enter or right click in 
> the
> rx window it will log the first contact and send the TU Now and pop the 
> next
> call to work off the stack and send his exchange. This way you don't have 
> to
> hunt for the correct F-key to press.
>
> This becomes easier than the LOGTHENGRAB macro as you don't have to check 
> to
> see if you have the correct call highlighted in the grab window.
>
> For those that are not familiar or have questions about the use of this
> macro. Larry K8UT has created a video that explains the workings of this
> macro.   The video is located on the N1MM web site under the Support Tab.
> The current copy of the video doesn't reflect the new change made but 
> gives
> the general over view of the Macro usage.
>
>
> 73 Rick N2AMG
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1191 / Virus Database: 1435/3401 - Release Date: 01/24/11
> 
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>