Hi Bill,
Well, I experimented with various settings (baud rates, marks and shifts)
and could not print my own transmission properly on my computer screen
above 110 baud, so I doubt I could copy anything intelligibly at 300 baud.
This
is my computer limitation, I guess. It can't keep up with itself. The
rig was not transmitting.
I suggest you find someone locally you can easily work with to run your
tests. I'm too far away and do not have enough power or a good enough
antenna system to make reliable skeds from sea to shining sea.
Good luck and let me know how things go.
73,
Kermit, AB1J
In a message dated 6/6/2011 7:09:33 A.M. GMT Standard Time,
dezrat1242@yahoo.com writes:
ORIGINAL MESSAGE:
On Sun, 5 Jun 2011 22:28:41 -0400 (EDT), Ktfrog007@aol.com wrote:
> I'd like to try a QSO with you, but doubt if I'd see anything but
>garbage.
REPLY:
What time and freq? I'm retired so most any time at all is good, Can do all
bands from 160 to 10 (except 60, where RTTY is illegal anyway).
If we only hear garbage at first, lets drop back to 45 baud and then try
higher
rates one at a time. Ok? Everybody is welcome to join in.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|