These are the ones that I used with the Makoren contest, I picked up a couple
of new ones this weekend for calling CQ auto after R TU K7QQ msg (I added
{SCQ} to the TU button and it starts CQ after set delay time, This command
works from the DI Copy window F keys. By adding the SCQ to the F3 TU Macro
in the DI window , after I enter / hit the F3 button and the TU message is sent
, then after delay for CQ Repeat (set in Config of Log window, the CQ is sent.
The upper group are the ones I use with the N1MM Logging window.
CQ,{TX} {ENTER} CQ TEST K7QQ K7QQ {PROFILE0}{ENTER} {RX}
RST,{TX} {enter}. ! 599 81 81 {ENTER} {RX}
TU, {TX} R * {LOG} {ENTER} {RX}
K7QQ, {TX} {ENTER}.* * {ENTER}{RX}
HIS,{TX} ! {RX}
DUPE,{TX}{ENTER} ! QSO B4 {name} TU DE * {ENTER}{RX}
?,{TX} ? ? {ENTER}{RX}
RY,{ENTER}{TX}RYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRY{RX}
AGN,{TX} AGN AGN {ENTER}{RX}
WIPE,{WIPE}
WIPE,{WIPE}
AGM,{TX} {ENTER} AGN AGN {RX}
CQ,{TX} {ENTER}{RUN} CQ TEST K7QQ K7QQ {ENTER} {RX}
RST,{TX} 81 81 {RX}
TU,{TX}{ENTER}TU {NAME} {RX} {ENTER}
K7QQ,{TX} .* * {RX}
HIS,{TX} ! {ENTER}{RX}
AGN, {TX} AGN {ENTER} {RX}
WA,{TX}{ENTER} 81 81 {ENTER}{RX}
WA,{TX} wa wa {RX}
==========================================================================================
This could stand some improvement but what I use with the DI window. Note {RX}
F1 CQ,{ENTER}{tx}CQ mak * * K {ENTER}{RX}
F2 Exch,{tx} ! cn87 cn87 {RX} {Enter}
F3 TU,{TX} R TU * {RX}{LOG}
K7QQ,{ENTER}{TX} * * {enter} {RX}
F5 HIS,{ENTER}{tx} ! {ENTER}{RX}
F6 QRZ,{ENTER} {TX} ? ? de * {ENTER} {RX}
F7Agn,{ENTER} {TX} AGN ? ? {ENTER}{RX}
TIME, {TX} TIME TIME ? {RX}
TU-LOG,{TX} tu {name} {LOG} {RX}
STOP,{STOPTX}
LOG,{LOG}
,-
,-
,-
,-
,-
LOG,{LOG}
STOP,-{STOPTX}
LOG,{STOPTX}{STOPTX}{ENTER}{LOG}
#,{TX}{ENTER} # # {time2} {RX}
WIPE,{WIPE}
,-
NR ?,{TX} {ENTER} NR NR {RX}
,-
,-
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Ross
Sent: Monday, October 21, 2013 5:59 AM
To: RTTY@contesting.com
Subject: [RTTY] Xmit Off
Hi Rex (K7QQ)
Tnx for ur help. I’ve never seen RX at the end of the macros. In
the block
of 16 macros they all turn off automatically at the end except one
and that
one I altered after I had this problem, now it diddles at the end
of the message.
TU, any other ideas much appreciated,
73, Ross
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
____________________________________________________________
New Diet Pill Hits Market
Highly Anticipated Weight-Loss Pill Now Available.
http://thirdpartyoffers.netzero.net/TGL3265/52651742ac7b117387d38mp07vuc
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|