If you printed 300 pages you did not print the MK2R+ manual - it is
88 pages.
> there not mention SO2R RTTY!!!!!
No, the words SO2R RTTY do not appear but the instructions for audio
switching of the RECORDING/DIGITAL inputs do appear with *separate*
instructions for Headphone switching for SSB/CW.
Again, the configuration will be unique to your station, transceiver
capabilities (one RX or two), and whether you are working two bands
(main RX for each transceiver), dealing with a split situation (two RX
one Rig) or using multiple decoders. You need to first take time to
understand the hardware capabilities *before* you jump to the end and
say the manual is incomplete. In general using the defaults and the
software configuration documented in the separate examples provides a
good starting point - one that works as long as you don't start pushing
buttons at random and banging the keyboard.
73,
... Joe, W4TV
On 4/26/2014 12:44 PM, post@lb3re.com wrote:
I have read it
there not mention SO2R RTTY!!!!!
it work for CW & SSB
its typical you to refer to manual.
when its not there on the pages!
I printed whole manual on 300 pages...
Den lør, april 26, 2014, 18:32 skrev Joe Subich, W4TV:
> the problem is LEFT radio audio appear on rigth radio.
>
> then i move focus to radio 1, radio 2 is muted when i go back to focus
> radio 2.
>
> No RTTY appear...
You have not followed the hardware set-up for "Functions" *READ THE
USERS MANUAL*. If you don't understand it, read it again until you
do.
73,
... Joe Subich, W4TV
microHAM America, LLC.
http://www.microHAM-USA.com
http://groups.yahoo.com/group/microHAM
On 4/26/2014 12:10 PM, post@lb3re.com wrote:
Hi
yes I have done it.
the problem is LEFT radio audio appear on rigth radio.
then i move focus to radio 1, radio 2 is muted when i go back to focus
radio 2.
No RTTY appear...
its quite weird its not possible to put a photo if each settigs into the
manual.
Wben there is 50 difference choices...
Sitting in 3 hours to get this working...
I gave up, stick to 1 radio.
Den lør, april 26, 2014, 17:08 skrev W0MU Mike Fatchett:
What logging program?
Have you downloaded the manuals from the Microham site? There are some
very good how to's.
You have to load two versions of MMTTY in two separate directories.
One
for radio 1 and one for radio 2.
Mike W0MU
On 4/26/2014 8:45 AM, post@lb3re.com wrote:
Hi
I need help.
anyone have a screenschot how to select MK2R+ for SO2R RTTY MMTTY ?
It is left out in MK2R+ manual, seems very crappy made manual if you
ask
me.
I would like to use MMTTY for 2 radioes, but there is not showed any
place
on the net :(
SC1 left or rigth ? what i choose to have both audio for each radio.
73s LB3RE Rag
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|