Hi Dick and all.
For the #1 I have adopted a plain solution. Out of any filter command
that could be made and then
stored into the Telnet window macro buttons I use only the RCK-DCS - RCK
Digital Cluster System.
Much easy and useful for RTTY only, just one command to get rid of any
other mode, CW.
Still PSK is coming in, as with some more exotic modes, but this would
depend much more on entries tagging,
thus the inability to filter out all things. At least in mine knowledge.
More on:
http://www.walter-dallmeier.de/software-by-dl4rck/rckskimmer/digital-cluster-system/
BTW there are both, skimmers and not skimmers - human - entries: quick
and dirty.
For the #2, no way on the band map, but what Rich, VE3KI, wrote is
enough to get known when you are spotted.
Again in the N1MM Logger Info windows there are both evidences for
spots. Those generated by the skimmers
and those by humans. Yours callsign on air is the key to select spots to
be shown there.
Hope that I added some more to the already exhaustive Rich responses,
not just wasting bandwidth ;-)
73 de iw1ayd Salvo
On 12/05/2014 15:01, rtty-request@contesting.com wrote:
Message: 5
Date: Mon, 12 May 2014 01:37:26 -0400 (EDT)
From: RLVZ--- via RTTY<rtty@contesting.com>
To:rtty@contesting.com
Subject: [RTTY] RTTY N1MM Logger questions
Message-ID:<bd3bd.377b2474.40a1b816@aol.com>
Content-Type: text/plain; charset="US-ASCII"
Hi Guys,
Wondering if a N1MM Logger person could answer the following questions
regarding RTTY operations while using N1MM Logger software:
1) Is there a skimmer filter that can be used so that only RTTY skimmer
spots are posted to my band map window? (I'd like CW skimmer spots deleted)
2) Currently, my Callsign is not shown in the band map window when I'm
spotted. Is there a way I can turn that feature on? (I want to make sure
that I don't QSY shortly after being spotted)
Thanks & 73-
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|