If it were a permissions problem it wouldn't work at all. This is an
intermittent problem.
On 02/04/2017 04:23 PM, NA6MB Mike wrote:
> Sounds like a permission problem to me.
> Make sure you have permission to write to the directory where the config
> files are saved. Sorry I cannot look at my setup to see where that
> directory/file is located.
>
> I run N1MM+ one two win10 machines with no problem.
>
> Mike
> NA6MB
>
>
>
> Sent from my iPad
>
>> On Feb 4, 2017, at 2:14 PM, Lee Roberts <ham@n0sq.us> wrote:
>>
>> I don't know what the problem is but I can't reliably run N1MM in
>> Windows 10. For some reason, it occasionally starts up with no
>> configuration and I basically have to start from scratch. It asks for a
>> new or existing database and proceeds to ask me to configure my station
>> (i.e. callsign, grid, ARRL section, etc). Then I have to go into the
>> menus and set up the rig and other parameters again. This is a major
>> hassle if I shut down for a couple a of hours and then have this happen
>> again. This doesn't happen when I run it under Windows XP.
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|