And the hookup for RTTY is the same as is used for all other digital
modes, FT8, JT65, WSPR, ...whatever. BTW, with the waterfall you will
never have to wonder where a clear spot is - none of this "is the
freq in use" stuff.
The 6300 is RATED for normal RTTY use at 100 watts by Flex, IIRC -
don't think any of the other 100 watt radios have this rating.
Jerry W4UK
At 01:21 AM 9/28/2017, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Wed, 27 Sep 2017 17:53:05 -0700, Mark wrote:
>
>Does it do 100 watts out on AFSK? One of the reasons I use an interface and
>true FSK is to get 100 watts out of my 7600. AFSK would limit to about 66
>watts if everything is dialed in correctly.
REPLY:
Yes, the 6300 does full power on AFSK and all modes for that matter.
Remember, when the 6300 is in RTTY mode, it's really AFSK but as I
said before you can't tell the difference. In other words, there is no
need to adjust audio drive level, etc. Just dial in the power you
want and go.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|