Re: [SD-User] Com port keying line

[Steve Harwood <g4owt@btinternet.com>]

In message <000001c40e68$b9e50c40$c3794ed5@mrevans>, G.W.Evans 
<gw3wwn@onetel.net.uk> writes
> Been using Win 98, no probs.  Now on Me, the Com port (pins 4 and 5),  is
> enabled at
> boot up, 8.4v appearing on the keying line, doesn't happen in safe mode, and
> didn't happen on Win98.  Starting SD
> clears the line and all is well, and stays that way when SD is unloaded.
> But I have to disconnect the PC keying line to use the rig for general CW
> working.
> I know that this is not an SD problem, it's the PC, but I need the info from
> somewhere. Thanks.
> Wynne, GW3WWN
> gw3wwn@onetel.net.uk
>
>
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user

I had Microsoft send me a fix for this have a look at
http://support.microsoft.com/support/kb/articles/q285/8/94.asp
I have the fix if you need it

Steve G4OWT
--
Steve G4OWT
email: g4owt@btinternet.com
Homepage: http://www.g4owt.btinternet.co.uk
Qsl Sub-Manager for G4A & G4H Series Calls

_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user