[Top] [All Lists]

Re: [SD-User] no cw keying

To: <>
Subject: Re: [SD-User] no cw keying
From: "Paul O'Kane" <>
Reply-to: Paul O'Kane <>
Date: Sun, 22 May 2005 17:41:36 +0100
List-post: <>
----- Original Message ----- 
From: "nico van der bijl" <>

> CW interface according to instructions, works fine
> with CT and with the old QW program, but not with SD,
> even when the screen tells me CW is being sent, no
> keying occurs on the LPT port.

SD assumes that your computer's internal hardware addresses
for the parallel ports are "standard". That way, when you
select Port 9, SD accesses LPT1 via its standard address,
and LPT2 when you select Port 10.

If you get no output from LPT1 with Port 9 selected, please
try Port 10 and let me know if it makes a difference (again
with LPT1).

Paul EI5DI
SD-User mailing list

<Prev in Thread] Current Thread [Next in Thread>