Just been testing set up for RSGB LP FD on Sunday with V 13.24 and found an
oddity. If I have the rig with CAT on 7 Mhz and key in a freq to switch to 80m
the rig switches OK and the freq chosen is shown below the call sign field
but the BAND indicator does not change. It stays as '40m'. If I then key
'B80' > Enter the BAND indication is corrected.
If I then key in a 7 Mhz freq to switch the rig back to 40 not only does the
rig switch correctly but the BAND indicator also shows the correct band.
Using this band switching method works for all the other contest bands except
80. I note that for the WARC bands keying in a freq to change bands also fails
to change the BAND indicator presumably because they are not contest bands.
It seems that somehow 80m has been treated as a WARC band in my set up.
Comments?
Ian G3KZR
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|