----- Original Message -----
From: "Fred Ockert" <m.ockert@bss-services.de>
>> From: "g3pdh" <g3pdh@btinternet.com>
>> I have XP running with Microham Keyer 2
>> with 5.1.1 firmware plus SD 13.33 and also find that the
>> page up/down is not changing the CW speed although it changes
>> the CW speed numbers on SD. Manual speed change works ok on
>> the Microham.
> do we have an option to (try) to debug it? what to do -
> helping the programmer to fix the problem ?
What can I say? It seems this problem may be related to
the user environment, and not directly to SD - the keyer
code has not changed for some time. I know that SD works
with WinKey (including speed changes with Page Up/Down)
- I use it myself every day.
If your WinKey (in the MicroHam box) is linking to SD
and everything works except speed changes with Page Up/
Down, then manual speed change is a simple alternative.
Please confirm that WinKey is working in other respects,
apart from Page Up/Down speed changes.
For information, I use WinKeyer USB, purchased directly
from K1EL. This has a direct USB connection, and needs
no external drivers or router software. It also uses the
14-pin WinKey chip. I don't know if it is significant,
but I believe most of the MicroHam units have the older
8-pin chip.
I'd like to hear from other MicroHam user who can tell
me whether Page Up/Down works.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|