That sounds right, although it should be SRX_STRING, as SRX is defined as a
number.
I wonder where either would end up when imported into a logging program. If
I were to do that, and really really needed the "RSGB" information, I think
I would put it in the notes field.
73 ... John, OZ4RT
----- Original Message -----
From: "Steve Harwood G4OWT" <g4owt@btinternet.com>
To: <sd-user@contesting.com>
Sent: Monday, July 14, 2008 9:46 AM
Subject: [SD-User] SD ADIF Export
> Having used SD 14.07 the weekend for the IARU contest I noticed the adif
> export is incorrect.
> I am trying to import my log from SD from and the ITU fields are not being
> populated correctly when the exchange was from a HQ station, it has been
> truncated i.e. RSGB becomes RS in the ITU Zone field.
> The adif file looks like this
>
> <Call:5>GB7HQ <Mode:3>SSB <Band:3>40M <Freq:5>7.060
> <RST_Sent:2>59 <RST_Rcvd:2>59
> <QSO_Date:8>20080712 <Time_On:4>1654 <ITUZ:4>RSGB
> <EOR>
>
> ADIF defines ITUZ as a number, not a group of letters. SD's use of ITUZ to
> convey this information is incorrect, should it not be <SRX:4> instead of
> <ITU:4> ie <SRX:5>VERON and the other should be <STX>
>
> For the moment I did a find and replace on the ADIF file to change
> <ITUZ:4> to <SRX:4> and the same for <ITUZ:5> etc
>
> Any thoughts on this one?
>
> Steve G4OWT
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|