G'day,
I decided to try out the K3 without any external interface for CW. The
K3 has built in level converters for the RTS and DTR signals so a simple
RS232 cable will do the trick. These signals can be assigned to PTT and
Key.
I first set up Logger32 and the CW machine plays OK.
When I try to set up SD to share a common port (4), first setting Com 4
as CW port followed by Com 4 as rig control I get the following:
"Com 4 is shared as a CW port", followed a few seconds later by:
"Com 4 doesn't exist or is busy".
Com 4 works perfectly OK as a rig control port if I don't set a CW port.
Com 4 works perfectly OK as a CW port if I don't set a rig control port.
Running Win7 Pro 64 bit with a real RS232 two port card.
Regards,
Mike VP8NO
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|