On 19/12/2014 22:39, Paul Bigwood wrote:
I'd like to be able to send TT1 for the first QSO and TT2 for the 2nd,
etc up to TT9 then it goes to T10 and T11 etc but I dont think SD
supports that as far as I can see.
That is indeed the way SD does it (has always done it) :-)
I can have supressed zeros, so it only send 1,2,3,4 etc the 10,11,12
etc. The zero in 10 is either a 'T' or full '0' depending on the
SD_CWZERO settings.
What I'm seeing is that the zero in 10 can be T, the letter O
or zero - it's a CWZERO option.
From tests I did yesterday, I believe the only outstanding
issue with CWZERO is that if you had previously selected
A as the cut version of 1, CWZERO would not change it back
to 1. This is fixed for V17.52.
I'm adding a feature to let you log any cut numbers (in
serials) as you hear them, and SD will do the translation.
For example, you type ANET - SD logs it as 1950. It will
do this character by character, but only for serials.
For what it's worth, the only cut numbers I send are
A, N and T - for 1, 9 and 0. In CQWW, I usually send
the zone as A4 and no one ever asks for a repeat.
Sometimes, after sending EUAA5 for IOTA, I do get asked
for a repeat. Now that I think of it, I'll add the cut
number translation/replacement to IOTA references.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|