[Top] [All Lists]

Re: [SD-User] RSGB AFS

Subject: Re: [SD-User] RSGB AFS
From: Paul O'Kane <>
Date: Fri, 18 Dec 2015 16:53:48 +0000
List-post: <">>
On 18/12/2015 15:45, John wrote:
Does the latest version of SD support RSGB AFS for cw on 40 and 80m

This will be supported in V18.13 - to be released this
weekend.  It's a two-line change in the template file

Here are the preliminary release notes

V18.13  December 2015

UKEI DX Contest
    SDCHECK - Cabrillo logs. The Section, UKEI or DX,
    corresponding to your call, defaulted to the wrong
    option. Fixed. The Section, UKEI or DX, was repeated
    for each Cabrillo headers.  Fixed.

    When editing previously logged QSOs, some callsign
    prefixes, for example MI, were not recognised as
    UK prefixes.  In turn, the District Code field
    could not be accessed.  Fixed.  Thanks EI2KA.

RSGB 1.8 MHz Contests:
    Updated for 2016 rules. CW-only.

    Updated the template file to permit logging on
    both 40m and 80m

PACC Contest:
    Multipliers now count by band and by mode.

    When connected, whether at startup or later, the
    COM port and WinKey version number (the chip) are
    shown.  For example, "WinKey Com5 - V24".  This
    confirms that WinKey has been enabled, and the
    version number helps with diagnostics.

NRRL Fylkestest:
    Dupe checking is now reset each hour (as the hour
    changes) when logging in real-time. Previously, the
    SETDUPE command was required.

    For post-contest logging, SETDUPE may be used as
    before, but it's easier to ignore it, then restart
    SD and let it rescore the log.

Paul EI5DI

SD-User mailing list

<Prev in Thread] Current Thread [Next in Thread>