Good morning to all
How do I change the MODE in a previously logged qso? There is no “Mode” field
to edit, at least not in the “DXpedition Logging Template”.
For my activity with II7FOC, I am using the “DXpedition Logging” template,
which must be a MIXED MODE one (*). At a certain moment, looking at the logged
qsos I found that in the RST field of the last one there was a 59 instead of
599, and the MODE indicator in the input field was now SSB instead of CW. A
few stations where still calling, but I did not remember how to change mode so
I worked and logged them in SSB mode, thinking to edit those records later
(Probably, while trying to hastily correct and then delete a call, an “S” was
inadvertently left in the call field, changing the mode).
The CW this time is manually produced, no WinKey, and I never used any CAT.
The Manual did not help in this case, so the only way I could find has been to
open and edit manually the .ALL and .AUD files, of course keeping the fields
well aligned vertically. All OK, but I am curious to know whether there is a
quicker way.
Ciao,
Sandro, I7ALE (II7FOC)
(*) From the manual: “In mixed-mode events, use the C (CW) or S (SSB) commands
to change mode”
---
Questa e-mail è stata controllata per individuare virus con Avast antivirus.
https://www.avast.com/antivirus
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|