[Top] [All Lists]

[SD-User] SD V21.19 Released

Subject: [SD-User] SD V21.19 Released
From: Paul O'Kane <>
Date: Tue, 21 Jan 2020 15:29:53 +0000
List-post: <>
V21.19  21 January 2019

Rig Control:
  If rig control is disabled or interrupted a warning message
  now replaces the frequency display. Previously, the display
  was simply cleared and it was not always obvious that rig
  control had been lost.

  The warning message is replaced by the rig's frequency when
  rig control is restored.

  Added safeguards to ensure SD always logs on the band
  matching the rig's frequency, subject to permitted bands
  for the contest. This applies to both continuously-working
  rig-control and to restoration of rig-control following an
  interruption, regardless of any change in band in SD or on
  the rig while rig control was interrupted.

  To enable or re-enable rig control manually, use the PORTS
  command. To disable rig control, set its port number to zero
  (again with the PORTS command).

HA DX Contest - both sides:
  Updated for current rules. Thanks PA0JNH & VK4TT.


SD is free from

When installing a new version of SD, to replace an older
version, take care to  "untick" the box corresponding to
"Create a desktop icon".  Otherwise you will have to resize
SD's window, and set other parameters described in GETTING
STARTED on page 3 of the manual SD.PDF.

If you find bugs, send the details to sd-user (at)

Earlier versions of SD are not supported, so please
confirm that any problem still exists in V21.19.

If you enjoy using SD, please consider adding a few
comments at
follow the "write your own review" link. GW4BVJ kindly
did this in September 2019.  You'll need an eham or login to submit your comments.

Just do it - please.

Thanks & 73,
Paul EI5DI

SD-User mailing list
<Prev in Thread] Current Thread [Next in Thread>
  • [SD-User] SD V21.19 Released, Paul O'Kane <=