Jim Janke wrote:
> My old OMNI-D has a problem when I turn the tuning knob
> counter-clockwise (down frequency). At one recurring place in the
> rotation the frequency moves back up 200-400 Hz when I take my hand
> off the knob. It is not a hand capacitance problem, as I can actually
> see the knob move slightly and it only happens at one spot in the
> rotation of the knob.
> Anybody ever have this problem?
> Jim K9WIE
> Lakeland, MN
Hello Om. I had the same problem on a Corsair II the only difference
is that mine would do it in either direction. I called TEN TEC and
gpt a vfo rebuild kit , about 20 bucks , fixed it up fine. I think
the only thing wrong was the old Grease, clean it and regrease it
and it will probably be ok. Let me know how it comes out.