I use a NON Amplified D104 with very positive results.
On Mon, 17 Feb 1997, Rick Blank wrote:
> > I recently purchased a TENTEC rig, Omin-D model 546. It did not include a
> > microphone. I had a D-104 amplified mic available so I wired it up. I
> > have had good and bad reports on the audio quality, mostly good. I need
> > suggestions, to continue using this mic, modification for it, or other
> > mikes that work well with this rig, for rag-chew and DX. Maybe this one is
> > find just depends who is listening. I would appreciate any suggestions.
> Try bypassing the amp in the mike and using the element directly into
> the rig and see what happens....just a suggestion, but, the crystal
> element is high impedence and so is the rigs mike input, right?
> It won't hurt to try!
> Rick Blank, KI5SL email@example.com
> 2223 Blanco Road AMSAT NA# 26195
> San Antonio, Texas 78212
> FAQ on WWW: http://www.contesting.com/TenTecFAQ.html
> Submissions: firstname.lastname@example.org
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: email@example.com
> Sponsored by: Akorn Access, Inc & N4VJ / K4AAA
FAQ on WWW: http://www.contesting.com/TenTecFAQ.html
Administrative requests: tentec-REQUEST@contesting.com
Sponsored by: Akorn Access, Inc & N4VJ / K4AAA