Perhaps someone can give me an idea of how to fix this problem, or at least
tell me why it is happening.
I have a KAMPlus TNC plugged into the rear panel of my Omni VI. I access
the TNC for RTTY via the FSK button on the front panel.
If I do any SSB transmission with the TNC plugged into the jacks but
powered off, I receive reports telling me that my audio is severely
The Omni VI manual says that the FSK is wired in with the SSB circuit. I
can understand that there might be a problem if the TNC were turned on and
had power to it while I was operating SSB.
However, this problem occurs merely because the TNC is plugged into the
audio out and mark/space jacks. The power is turned off.
Any ideas would be appreciated because it is extremely inconvenient to
access the rear panel anytime I want to change operation between SSB or
Thank you and 73,
FAQ on WWW: http://www.contesting.com/TenTecFAQ.html
Administrative requests: tentec-REQUEST@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA