[Top] [All Lists]

[TenTec] Serial cable for Omni VI question.

To: <tentec@contesting.com>
Subject: [TenTec] Serial cable for Omni VI question.
From: chestert@pressroom.com (Chester Alderman)
Date: Fri, 05 Sep 1997 13:24:41 -0400
You may have missed a couple of words. It actually says a standard
null-modem cable must be used. A null-modem cable is a standard 25 pin
serial cable with specific wiring changes. And yes, there is a standard
serial cable AND a standard null-modem serial cable.

At 09:21 AM 9/5/97 -0500, you wrote:
>The Tentec manaul says a standard 25 pin serial cable is OK for
>connection to a computer, but the diagram in the manual shows some pins
>connected together.  Does a special cable have to be wired up for rig
>control of the Omni VI?
>Tnx es 73 de John, WA5TWL
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
Chester Alderman
Tom - W4BQF

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>