At 05:05 PM 9/13/97 -0500, you wrote:
>I just ordered my first TenTec rig, the Omni VI+, and I'm trying to prepare
>my station accessories while waiting for the rig that hopefully represents
>a step up from my TS-850. Who knew that waiting would be so hard?
But it's gonna be worth the wait! I've had an Omni 6 for six years and just got
it converted to the Plus. Will be interesting to hear your opinion after you
have operated the radio for a few months.
>One of those projects will be to remove the 8 pin mike connector from my
>Heil headset mike and replace it with the 4 pin variety.
Don't be too disappointed when you plug in your Heil headset. Heil headsets are
designed to work with audio voltage type outputs like the Kenwoods. Icom and
TenTec radios do not drive the headphones with very loud audio.
>Could someone tell me what the assignments are for the 4 pin TenTec setup?
>And while I'm asking questions, will TenTec ship a DC power cord with the
>radio, or just a plug?
The pin connections for the micraphone are: Pin 1 = audio; Pin 2 = Ground;
Pin 3 = PTT; and Pin 4 = VDC. If you plan on using VOX only, then of course you
only need to hook up pins 1 and 2.
If you ordered the power supply, the DC cable and connector are an intergal
part of the power supply. Otherwise you just get a blank connector that fits
the back of the Omni.
BEWARE!!! YOU ARE ABOUT TO BECOME HOOKED BY TENTEC!!!
>73, de Mike Pagel, K9UW
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
<color><param>0000,0000,ffff</param>W4BQF -- Tom
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com