[Top] [All Lists]

[TenTec] corsair2 sidetone

To: <tentec@contesting.com>
Subject: [TenTec] corsair2 sidetone
From: k5rov@worldnet.att.net (James Parsons)
Date: Sun, 14 Sep 1997 20:53:07 -0500
I have gotten used to the sidetone on my Corsair II, and don't mind it. But
it does not have the pleasant sound of a sine wave. The Corsair II is one
of the finest rigs I have ever owned, and I have owned a lot of them. But,
I would rather have a pure sidetone than the square wave tone. But, it
works, and does the job, such as it is.

Jim, K5ROV

At 01:30 AM 9/15/97 +0000, Chester Alderman wrote:
>At 08:49 PM 9/14/97 -0400, you wrote:
>>I don't know who's corsair Chester has been listening to, but the
>>sidetone on mine sounds great.
>Cool...if you like yours, then that's grand. I've been listening to my own
>two modified Corsair II's, my own modified Omni D, my own Omni Six Plus,
>and my own IC-781. To MY ears, the stock pre-Omni V sidetone sounds very
>similar to what you would expect an almost square wave to sound like.
>>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>>Submissions:              tentec@contesting.com
>>Administrative requests:  tentec-REQUEST@contesting.com
>>Problems:                 owner-tentec@contesting.com
>>Search:                   http://www.contesting.com/km9p/search.htm
>Chester Alderman
>W4BQF -- Tom
>-- FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com Administrative requests: 
>tentec-REQUEST@contesting.com Problems:                
>owner-tentec@contesting.com Search:                  

James (Jim), Parsons, K5ROV USAF, Ret.
k5rov@worldnet.att.net   QCWA, NWQRP, Fists, ARRL
JOHN 3:16

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>