[Top] [All Lists]

[TenTec] Omni V problem

To: <tentec@contesting.com>
Subject: [TenTec] Omni V problem
From: BEAMERJA@lbh.panamsat.com (Jay A Beamer)
Date: Mon, 29 Sep 1997 19:35:00 +0000
           ***Message delivered from cc:Mail***

From:    Jay A Beamer@4H-MAILC05
To:      smtp:TenTec@contesting.com

To: <tentec@contesting.com>
Date: 9/29/97 12:37PM
Subject: Omni V problem
Hello everyone,

Got a slight problem with an Omni V and a 250 Hz filter in the slot labeled
(forget which IF this is). If I have an S9 cw signal then select the 250 Hz
filter, the signal drops to about an S2. I've tried another filter in this
position and it appears to work fine so it doesn't appear to be rig related.
guess is a filter problem. I've checked for cold solder joints on the filter
board with no luck. Is there a common failure on these type of filters? Any
suggestions?  Would hate to have to send it to Tenessee.


Jay, KM6VX
Torrance, Ca.(310)366-7408

--------------- End of text item ---------------

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>