[Top] [All Lists]

[TenTec] R-7000 Vertical Experience

To: <tentec@contesting.com>
Subject: [TenTec] R-7000 Vertical Experience
From: nwald@interaccess.com (Norman Wald)
Date: Wed, 15 Oct 1997 07:47:26 -0500
To: <tentec@contesting.com>
>Date: Wed, 15 Oct 1997 07:44:45 -0500
>To: K5XS@aol.com
>From: Norman Wald <nwald@interaccess.com>
>Subject: Re: [TenTec] R-7000 Vertical Experience
>>I apologize for being a tad off topic here, but after reading the QST review
>>I wondered what my Ten-Tec brothers and sisters would have to say.
>>Has anyone used the R-7000 vertical?  I'm generally not a vertical kinda guy,
>>but have a need for something protable to take out in the boonies with my Boy
>>Scout troop (and the Omni) and am considering the R-7000.
>>Would welcome experiences or thoughts.  Thanks.
>Dear Bernie,
>I love my R7000! I used a Cushcraft R3 vertical for about 10 years before
>taking it down and replacing it with the R7000. The R3 is still in perfect
>condition, never had a problem with the traps even running almost 200
>watts output with my Drake TR7.
>The two reasons the R7000 replaces the R3 is: 1) The R7000 has 40 meters,
>2) the R3 used a tuning box to remotely move a large capacitor at the base
>to resonate the frequency. The R3 was built before the WARC bands, but
>covers 12 and 24 just fine, even though it was designed for 20, 15 and 10.
>The R7000 is MUCH sturdier than the R3 and has stainless steel parts. So
>my bottom line is if the R3 lasted this long, and still works, the R7000
>has to be a big improvement.
>Just to satisfy the TenTec topic portion, most of the time I was using an
>Argosy at 50 watts. The Drake has twice the output, but the TenTec always
>heard better! The Argosy just got replaced with a Scout because I'm
>traveling a bit more these days and the Scout is smaller and has a built
>in keyer.
>By the way, I'm a wee bit shy of Honor Roll with my vertical only, (315
>current, 321 with deleted, mixed - mostly CW) except for an occasional
>foray onto 40 meters using a dipole. Never used a beam or kilowatt here!
>All you need for DXCC Honor Roll is time, not kilowatts!
>73 from Chicago,

Norman Wald
2125 W. Summerdale Ave.
Chicago, IL 60625
Amateur Radio N9NW
(312) 490-6622 voice pager
(773) 878-8863 fax

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>