[Top] [All Lists]

[TenTec] a couple of questions

To: <tentec@contesting.com>
Subject: [TenTec] a couple of questions
From: sales@tentec.com (Ten-Tec, Inc.)
Date: Fri, 07 Nov 1997 16:14:18 Eastern Standard Time
At 01:02 PM 11/7/97 -0500, you wrote:
>These are only related by the fact that they are both puzzling me. 8^)
>Are the coax connectors used on the cabling between PC boards on Ten Tec
>gear type MCX?

The type of connectors used varies with the type of equipment.  Send
me an e-mail message direct and we'll try figure out what you've got
in the radio you have. 

>I have an old Ten Tec electret microphone with my Corsair II. It looks
>to me a lot like the old Electrovoice 666(?) series mics. I can't find a
>Ten Tec model number anywhere on it, but it does have a T-T orange dot.
>Can anyone identify this?

The microphone you are looking at is either the 214 or 215 series microphone,
maufactured by us in the 70's and 80's.  This microphone was cast from
Electro-Voice molds, which is why it looks like that series of mic!

I have a minute to wax nostalgic, so here goes:  Al Kahn, K4FW, founder and
chairman of the board of Ten-Tec, was one of the two founders of the 
Electro-Voice corporation back in the 1920's.  EV was named by none other
than the great Knute Rockne ("The Gipper").  Al had set up a microphone
and speaker system on the practice football fields of Notre Dame in 1927
for Rockne to use in directing the Irish practices, and Rockne called the
set-up his "electric voice", hence the name.  Al Kahn is originally from
South Bend, In. and that is where Electro-Voice was founded, moving just
over the border into southwest Michigan in 1946 to bigger production

Al was instrumental in the founding of Heathkit in the post-WW2 period. 
Heath was located some 25 miles away from the EV factories in Michigan
and Al provided a traincar full of war surplus electronic parts that
evolved into Heath's first kit project, an oscilloscope.  The rest was

In 1965, Al came to Tennessee to open two Electro-Voice plants, one in
Sevierville, TN (home of Ten-Tec) and one in Newport, TN, 20 miles away.
To this day the Sevierville EV plant is located directly across the
street from Ten-Tec.  Al always had an interest in manufacturing
amateur radio gear.  He's been a fanatic CW op since the 1920's (is still
on 40m CW daily), and in 1968 sold his interest in Electro-Voice, bought 
15 acres of land across the street, put up our building and he and co-founder 
(still president) Jack Burchfield, K4JU (a former EV employee) started doing 
tool and die work and building QRP ham gear at that time.  
Here we are, 29 years later.  

Ten-Tec is 100% owned by current and former employees and their families. 

Have a good weekend!


Scott Robbins, W4PA
Amateur Radio Product Manager

Ten-Tec, Inc., 1185 Dolly Parton Parkway, Sevierville, TN 37862 USA 
  Contact Mon-Fri Eastern time:  Office/Tech (423) 453-7172 9 am-5 pm.  
  Repair (423) 428-0364 8 am-4 pm.  Sales (800) 833-7373 9 am-5:30 pm.
  Fax (423) 428-4483 24 hrs.  E-mail <sales@tentec.com> for sales and
  general product info only.  We presently do not offer repair or
  kit building tech support by electronic mail, please telephone.
  Visit us at <http://www.tentec.com>

  Ten-Tec manufactures amateur radio equipment, military and commerical
  use HF radio equipment, custom aluminum and steel enclosures and has an
  on-premises, fully equipped tool and die facility supplying the metal
  and plastic injection mold industries.  Potential tool and die, custom 
  enclosure or communications electronics customer?  Contact us.

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>