One thing to make sure of is that your meter actually reads correctly...I've
seen some widely varying readings...especially on the power meter.
73, Ty K3MM
-----Original Message-----
From: Chester Alderman <chestert@pressroom.com>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Friday, November 07, 1997 17:54
Subject: Re: [TenTec] Titan Plate Voltage ?
>My six year old Titan reads about 2200 volts no-load, and about 1800 volts
>at 1.5 Kw out.
>
>73,
>
>
>
>At 09:00 AM 11/7/97 -0500, you wrote:
>>What plate voltage (load and no-load) would one expect to see on a
>>properly operating relatively late model (5-6 years old) Titan?
>>
>>thanks & 73 James / k1sd
>>
>>--
>>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>>Submissions: tentec@contesting.com
>>Administrative requests: tentec-REQUEST@contesting.com
>>Problems: owner-tentec@contesting.com
>>Search: http://www.contesting.com/km9p/search.htm
>>
>Chester Alderman
>Tom - W4BQF
>chestert@pressroom.com
>
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|