TenTec
[Top] [All Lists]

[TenTec] Paragon 81338 Pll major loop board -Reply

To: <tentec@contesting.com>
Subject: [TenTec] Paragon 81338 Pll major loop board -Reply
From: hmmjr@erols.com (H. M. Motley, Jr.)
Date: Mon, 01 Jun 1998 12:08:01 -0400
The PLL/Major loop board in the Paragon seems to be a problem area. 
Whether it was a design or construction problem is really of no
importance to the end user.  I have a 1991 vintage Paragon and have have
problems with this board on three occasions.  The first time, I cured
the problem by resoldering the connections around the troublesome VCO. 
The second time it occurred, I sent the rig to Ten Tec and they provided
a newer version of the board which required a change in the software. 
This was a pain in the neck as I then had to get an upgrade in my Giehl
chip as it would no longer function with the "upgraded" board.  The last
occurrance of the problem was about a year ago.  At Ten Tec's advice, I
completely resoldered the board. This was a tedious job for a
non-technician starting with removing all the old solder with solder
wick and a solder sucker and resoldering every connection on the board.
This cured the problem and I've had no trouble since but I would not
recommend this job to the novice solderer!
I've talked with a number of Paragon users on the air and find that many
of them have had similiar troubles with their Paragons so it appears to
be a common problem.  I still use my Paragon daily and it does
everything I need in a rig, but I would never recommend a used Paragon
to anyone unless it's history was well known and the potential buyer was
VERY HANDY WITH A SOLDERING IRON! 

73,
Puck, W4PM


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Paragon 81338 Pll major loop board -Reply, H. M. Motley, Jr. <=