Tom: Are you using the built in FSK or AFSK?
If you're using FSK, you will have to adjust the
local oscillator to the proper frequency.
Unfortunately, you may have to use 200 hz shift
instead of the proper 170 hz due to the use of those
shifts by the new gang, without realizing that the
170 hz shift was very carefully picked to minimize
I've given up and gone to AFSK and then you're
TU (or controller) sets the tone frequencies.
Good luck. de KL7HF
> From: Thomas A. Reilly <email@example.com>
> To: firstname.lastname@example.org
> Subject: [TenTec] fsk
> Date: Saturday, June 06, 1998 4:52 AM
> I have recently started to use rtty and pactor. I have had to set the
> to -.13 to be able to connect. Why?
> Tom Reilly
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: email@example.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com