The sheet that came with my new filter last week (# 74089-C) agrees with
Fig 1-5, page 1-4 of the Omni 6 manual. Both advise to jumper pins 1 and
After installing the new 221 filter, it is working perfectly. when
with the 250 cycle filter in the 6.3 Mc IF it really performs nicely. Only
wish the center Freq was another 100 cy or so lower !
73 John firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com