On 6/7/98 7:19 AM, DUANE BUDD at firstname.lastname@example.org wrote:
>First, Tom, you did not state which Ten-Tec rig you are using. Speaking for
>the Omni VI, the manual says the fsk shift is set to 170KHz, which is the
>"correct" standard for RTTY. The "correct" new standard for PACTor is
To me, a 170 kHz or 200 kHz shift seems excessively wide. By three orders
Most RTTY and Packet uses 170 Hz and 200 Hz shifts. Indeed, shifts larger
than 1 kHz are prohibited by the FCC below 30 MHz.
Bill Coleman, AA4LR, PP-ASEL Mail: email@example.com
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com