I just down loaded CT ver 9.37 and I still have a problem with the OMNI-VI
When I use ALT F1 or F2 to change bands the OMNI switches from VFO A to VFO
B and does not change bands...If I hit the band button on the OMNI CT
responds correctly. I had the same problem with CT ver 9.36, but not with
ver 9.27 or earlier.
I switched the radio on and off ....no change...
Bd 1200 radio 4 Cde on
Have you had similiar problems???
73, Jim WB2TPS
>I have the latest CT here and no problem at all with the
>OMNI-6. In fact, I've used the SIX with all versions
>from 8.0 up and have never had a problem. Sometimes,
>after starting CT, it will give you the message about the
>radio not responding. Turn the OMNI off and back on and it
>By the way - 0n filters, the 1.8 Filter makes a great casual cw filter.
>I find it not much good on ssb, too tight, but great for cw. Contesting
>is done with the two 500 cycle filters and never have to go tighter.
>>BTW anyone ever get the most CT version to work with the OMNI VI+ ???
>>73, Jim WB2TPS
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com