I didn't check the manual before I posted the note.....I'll take a look
later....the open pins are a temptation to try a few things....
Your price list for the 301 is about right and mebbe a little low....If I
recall, TT sold the 301 for $100....
Sorry I can't help on the Hercules..I used one at W1AW, but never peeked
sounds like blown finals or bandpass network....did someone try to use it
without a load connected??
73, Jim WB2TPS
>>I had to do the same thing for CW....but took it a step
>>output from the computer goes to a switch box...the box contains
>>converter...DB-25 to a TNC and a keyed reed relay for CW
>> (I use CT for contesting)...and switches all the audio leads!!!
>>Now, I'll trade a DB-25 pin for CW for a DB-25 pin to the REV
>>way I could mount a momentary switch on the remote
>VFO....wouldn't that be
>>dandy for split freq. DX'ing!!
>That sounds neat....hmmm......
>>But I think the DB-25 on the OMNI is filled up with band control
>Actually, it's not. If you are using a homebrew DB25 cable for
>computer control/301 control, there are 10 pins on the Ten-Tec
>DB25 panel connector available to wire stuff to
>Well, there goes the weekend......
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com