Yes, I was describing the Omni-VI+. But in order to clear the RIT/XIT,
you can't just punch the clear button or the RIT and expect them to work.
Try it. Key the rig on CW and try to turn off RIT or XIT. Or, press
the clear button momentarily - it will only work if you hold it down.
Not something you want to have to play with during a contest. Anyway,
that was my point. Most other rigs I've used respond immediately - there
is no guessing about whether it did what you wanted (well, except when I
push the wrong button, but we won't go into that!).
73, Duane AC5AA
On Sat, 5 Sep 1998 23:43:18 -0500 "Dale L. Martin" <firstname.lastname@example.org>
>>The comment about RIT, etc., is that you cannot reset controls
>>transmit. I don't like it either, but I put up with it since I
>>much else about the rig. You also can't switch quickly to your
>>frequency while using RIT while transmitting (QSK).
>We're talking about the VI PLus, right? The few times I ever
>turn on the RIT and use it, I have been able to move it back to
>0.00 while transmitting. It may not be 'quickly' as in
>immediate, but I can do it before the transmission is over.
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
Duane A. Calvin, AC5AA
ac5aa@Juno.com -or- email@example.com
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com