Ten-Tec 234 Speech Processor in excellent condition w/manual.
A great addition to your Ten-Tec station to increase talk power and increase
average power output (SSB)of your rig. Works with earlier rigs, Omni-A,
Omni-C and Argonaut rigs.. etc.. Some even use them with newer Omni's..
Price: $80US - Shipped to Canada or US (lower 48 states)!
MODEL 234 SPEECH PROCESSOR
The Model 234 is a high performance rf-type speech processor designed to
operate with most transceiver systems. It will provide an average 5 to 6 db
increase in average power output in ssb service, This power increase,
its unique ability to tailor the speech passband, can make the difference
a solid contact and none when conditions are marginal, Because it is an rf
processor, the harmonic distortion that must occur in the clipping process
completely removed by the second crystal filter, Unlike conventional
compressor systems, Model 234 provides the capability to tailor the
response of the system for optimum processor punch.
Power Requirements: 11-16 VDC @ 75mA
Microphone Channel Input Impedance: 5O0 k
Operating Input Level: 25 mV
Maximum Input Level: 400 mV
Maximum Output Level:
A.) No Processing: 400 mV
B.) Full Processing: 75 mV
Minimum input for Full Processing: 5 mV
Controls: PROCESS CAIN; PASS BAND ADJ; IN-OUT SWITCH
Semiconductors: 2 ICs: 10 Transistors; 5 Diodes
Filters: 2 Four Pole Monolithic
Size HWD: 2-1/2" x 4-3/8" x 7-5/8"
Weight: 1 lb,, 5 02.
Comments on 234 from the reflector:
> I use my RF (234) processor in place of the audio speech processor in my
Omni VI+ > > level 3, and am very happy with it. Steve - KJ7CH
Ken - VE5KC
E-Mail? - firstname.lastname@example.org?????
KC's Amateur Radio Page - http://www.qsl.net/ve5kc/
KC's Canada Page - http://www3.sk.sympatico.ca/fsr567/Canada.html
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com