Interesting....I plugged my stereo headphones into my Omni VI+
and heard audio in both ears. If it was a mono jack, I would
only hear one headphone.
Plugging a mono or stereo headphone set in should give the same
indication: audio in both ears.
Check the radio schematic (in my book it's between page 4-53 and
5-1) and you should see that the phone jack is a stereo phone
jack with make/break contacts for diverting the audio to the
speaker when a plug is not in the jack.
From: Jim White <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Date: Saturday, September 19, 1998 7:38 AM
Subject: [TenTec] Mono-Stereo audio jack
>Hi, My Omni VI + has a Mono jack on the front for "phones"- it
seems to like
>Lo-Z better, I have a pair of 600 Ohm WWII phones that work FB.
>phones have less volume--' 73 Jim W. K1EXE
>FAQ on WWW:
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com