[Top] [All Lists]

[TenTec] TX EN & TX OUT Jacks

To: <tentec@contesting.com>
Subject: [TenTec] TX EN & TX OUT Jacks
From: paulc@mediaone.net (Paul Christensen)
Date: Sun, 20 Sep 1998 20:27:20 -0400
TX OUT is an open collector, switching the ground.  TX EN is the amp return
line and it wants to see a mating open collector from a Ten-Tec amp.
Without a Ten-Tec amp, the rear panel jumper must be in place to close the
keying loop.

-Paul, W9AC

-----Original Message-----
From: w6ru <w6ru@lightspeed.net>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Sunday, September 20, 1998 8:23 PM
Subject: [TenTec] TX EN & TX OUT Jacks

>This is really confusing....what I see in the Omni 6 book (which has
>been mentioned here before several times) and what I measured at those
>jacks does not jive.
>I will do it again to make certain.
>Terry - W6RU
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>