In my post on the subject awhile ago, I typed this:
>>Be sure the AGC button is ON (I had put it off last
>night while fooling around); Omni fast QSK does not
>seem to work with the AGC OFF. And, go to menu 1,
>and shut the LCO back off, if you have had it on; this
>stops the relay clicking noise!
Actually, it seems to be just the oposite. The described
fix for VI+ and 87A QSK seems to require that the Omni
AGC be set to OFF !? What I did when typing the above,
was have the AGC buttom pushed IN; and that turns it OFF,
So, the S meter does not read, and be ready to turn down the
RF gain if a strong signal shows up near by; use at least
a 500 Hz CW filter when in QSK operation, or narrower?
Wonder why this QSK fix is impacting the use of AGC?
73, Jim, KH7M
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com