Carl, The website for AB4GX Yagi is; http://188.8.131.52
follow links to "residential yagi" or "Build 20M Yagi" the photo is at the
bottom..I would like to emphasize that the Fiberglassing of the end (boom)
pieces IS important for strength.. and for the plywood pieces, I used 5 ply
birch aircraft plywood from the hobby shop ( 1/4 in.)- AB4GX says he was
able to get a match to 50 ohms with a 1-to-1 balun.. I went right for the
throat with a 50 ohm unbal. to 12.5 ohm balun..also, my resonant freq.
(center freq.) shifts down in the rain, I simply coated the coils with 5
coats of oil paint- AB4GX used large Dia. shrink tubing. Probably better
with the shrink tube to keep water off the coils..
'73 Jim W. K1EXE
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com