Go for it! If you want to test it before setting it up (although connecting
it to your Omni is so-o--o-o easy), put +5 V to the + pin, and ground to
the - pin, and look at the Phase A and Phase B outputs on your
oscilloscope. When you twirl the knob, it'll generate a square wave pulse
train. Be sure it does this for both directions (both phases). If so, it
works. Do what i did and hook it up. Lotsa fun!
Vy 73, AI2Q, Alex .-.-.
> From: Arthur R Bernstein <firstname.lastname@example.org>
> To: email@example.com
> Subject: [TenTec] Optical encoder info??
> Date: Wednesday, September 23, 1998 11:46 PM
> I recall reading recently about several of you using various optical
> encoders to either replace the one already in your OMNI VI or using it
> for a homebrew 301 external control.
> I've found an optical encoder in my "good junk" box. It's a Hewlett
> Packard "HRPG-ASCA #14C." Below that is "90 07" (could be date of Mfg.)
> It's a miniature panel mount optical encoder. Has a 5 conductor flat
> cable and 5 pin female connector. I have spec. booklet w/dimensions.
> Anyone know if this is suitable for TenTec applications earlier
> Any info anyone?
> Art, N2KA..
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com
> Or call Juno at (800) 654-JUNO [654-5866]
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: firstname.lastname@example.org
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com