Keith...I believe that this mod does reduce the agc contant a bit, but qsk
is still very satisfactory and the overall agc seems to be about right.
Popping is much reduced. Unlike my Omni, the Argosy does not have an RF
gain control, so the capacitor mod is about the only option. I am not sure
if the mod directly affects the agc recovery or the qsk delay, I haven't
followed the schematic thru. I figured since the mod was so simple, if I
didn't like the result, I would put the old cap back in. (Emperical
engineering, hihi) About all the mods that I know of for the Argosy are
contained in the excellent webpage "Unofficial Ten-Tec Homepage" the Url:
Hope this is of some help for you....
73 de Ron/kb9lsh
From: K & H Darwin <email@example.com>
To: TenTec List <firstname.lastname@example.org>
Date: Sunday, November 01, 1998 20:29 PM
Subject: Re: [TenTec] ARGOSY II FEEDBACK
>> From: Ron Kerlin <email@example.com>
>> To: ARDUJENSKI@aol.com; TenTec@contesting.com
>> Subject: Re: [TenTec] ARGOSY II FEEDBACK
>> Date: Friday, October 30, 1998 11:32 AM
>> The only thing that I didnt like about the Argosy was the initial popping
>> the agc during cw receiving. There is a simple, 10 minute mod that
>> replacing an electrolytic capacitor with one of a larger value. This
>Did this mod change the AGC recovery time constant? I've owned several
>TenTec rigs and have modified all of them to speed up the AGC recovery
>time. This of course, gives more popping which I compensate for by
>reducing the RF gain a bit.
>Did you do something different??
>- Keith AA5AC -
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com