A few minutes ago, I sent this note to Rick. I should have put
it on the reflector....
Check your manual, Rick. For the Omni VI, it's on page 4-39.
connector connects to plug 80*. Plug 80 contains three leads:
+5v, phase1, phase2. They connect to the DB25 connector at pins
16, 6* and 8, respectively.
Get yourself a couple of DB25's (male and two females) Wireup a
'pigtail' connector affair or 'Y' cable for feeding the computer
and the 301.
Or, simply go into the exisiting DB25 connector coming from the
computer and wire a small cable with a three conductor connector
(maybe a DB9 or a small molex connector) and interface that to
the 301 cable.
the 301 is worth it, by the way.
Dale Martin, KG5U
http://www.hal-pc.org/~kg5u -- see my Model 301 on my website!
* = Rick: I sent you '5' instead of '6' -- my eyes are not Y2K
compliant and are being adversely affected by the approach of
Also, I cannot guarantee it's is plug 80 that I am reading...I
think that's what it is ...
Forget the new bells and whistles, T-T! Provide reading glasses
with the manual!
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com